Digital 3D anatomical modeling of the mandible with full teeth

ZHU Fu-dong SHI Jue SONG En GE Wei-li LIAO Sheng-hui*

Acta Anatomica Sinica ›› 2014, Vol. 45 ›› Issue (4) : 536-539.

Welcome to visit Acta Anatomica Sinica! Today is Chinese
Acta Anatomica Sinica ›› 2014, Vol. 45 ›› Issue (4) : 536-539. DOI: 10.3969/j.issn.0529-1356.2014.04.017

Digital 3D anatomical modeling of the mandible with full teeth

  • ZHU Fu-dong1  SHI Jue1  SONG En1  GE Wei-li1  LIAO Sheng-hui 2*
Author information +
History +

Abstract

Objective To study and establish a high quality digital 3D anatomical modeling of the mandible with full teeth.Methods A set of accurate digital models of standard anatomical specimens of mandibular teeth were obtained by laser scanning, and the 3D mandible model was reconstructed by CT scan data; then, a registration deformation method based on the geometry and image anatomical landmark was employed to do the registration of each tooth to the mandible model, and finally the tooth enamel, dentin, periodontal ligament were generated. Results A high quality digital 3D anatomical modeling of the mandible with full teeth was built, each tooth had detail crown and whole root, the distinction between the enamel, dentin, periodontal ligament, and any anatomical regions can be zoomed and rotately displayed.
Conclusion The digital 3D anatomical modeling of the mandible with full teeth has realistic 3D imaging view and convenient teachinglearning function, and has tremendous apllication futures in the stomatology, maxillofacial and other medical departments.

Key words

Mandible / Full teeth / 3D visualization / Digital atlas / Human

Cite this article

Download Citations
ZHU Fu-dong SHI Jue SONG En GE Wei-li LIAO Sheng-hui*. Digital 3D anatomical modeling of the mandible with full teeth[J]. Acta Anatomica Sinica. 2014, 45(4): 536-539 https://doi.org/10.3969/j.issn.0529-1356.2014.04.017

References

[1]Yang H, Liu HCh, Cheng LQ, et al. Three-dimensional reconstruction of magnetic resonance imaging of the temporomandibular joint and the mandible[J]. Journal of Modern Stomatology, 2000,14(2):107-108.(in Chinese)
杨辉,刘洪臣,程流泉,等. 颞下颌关节及下颌骨的磁共振三维重建[J]. 现代口腔医学杂志,2000,14(2):107-108.
[2]Zhao BD, Li NY, Zhou YG, et al. A study of rebuild of a three-dimensional anatomic model of mandibles[J]. West China Journal of Stomatology, 2002,20(1):23-27.(in Chinese)
赵保东,李宁毅,周仰光,等. 下颌骨的三维重建及实体解剖研究[J].华西口腔医学杂志,2002,20(1):23-27.
[3]Zhang QF, Lü ChT, Liu GQ, et al. Analysis of the effect of three2dimensional reconstruction of mandible and its relevant influencing factors[J]. Medical Journal of Chinese People’s Liberation Army, 2006,31(11):1050-1052. (in Chinese)
张庆福,吕春堂,刘国勤,等.下颌骨三维重建效果的测量分析研究[J]. 解放军医学杂志,2006,31(11):1050-1052.
[4]Zhang DF, Ma JF, Wu LJ, et al. Research on 3D visualization of morphological variable of mandible[J]. Stomatology, 2010, 30(1):8-11. (in Chinese)
张大风,麻健丰,吴立军. 下颌骨形态变化量的三维可视化研究[J].口腔医学,2010, 30(1):8-11.
[5]Wu WZ, Chen YD,  Cui KP. Establishing 3D mandible FEA model via clinical CT images[J]. Applied Mechanics and Materials, 2011, 4447(1-4): 1952-1956.
[6]Zhang Y, Pei GX, Yuan L. Rapid 3D reconstruction of mandible from virtual Chinese human data[J]. Chinese Journal of Medical Aesthetics and Cosmetology, 2004, 10(2):83-85. (in Chinese)
张宇, 裴国献, 原林. 虚拟人数据的下颌骨快速三维重建方法[J]. 中华医学美学美容杂志, 2004, 10(2):83-85.
[7]Zhang Y, Tang L, Chen M. Construction of a three-dimensional mandible model containing teeth based on the Virtual Chinese Human data[J]. Journal of Southern Medical University, 2008, 28(8):1449-1451. (in Chinese)
张宇,唐雷,陈明. 基于“中国数字人”切片建立包含牙列的下颌骨三维模型[J].南方医科大学学报, 2008, 28(8):1449-1451.
[8]Li NY, Ma YB, Gu F, et al. Study of digital visual mandible [J]. West China Journal of Stomatology,2007,25(1):83-89. (in Chinese)
李宁毅,马彦博,谷芳,等. 数字化可视下颌骨的初步研究[J]. 华西口腔医学杂志,2007,25(1):83-89.
[9]Gu F, Wang Y, Li NY. Three - dimension digital model reconstitute of visible male mandibula in china[J]. Journal of Modern Stomatology, 2007, 21(1):517-519. (in Chinese)
谷方, 王钰, 李宁毅. 国人数字化下颌骨的计算机三维重建[J].现代口腔医学杂志, 2007, 21(1):517-519.
[10]Chen M, Ni LX,  Zhang Y, et al. Comparison study on the 3D reconstruction of mandible according to Virtul Chinese Human slice data and CT data [J]. World Journal of Modelling and Simulation, 2007, 3(3): 235-240.
[11]Gao B, Zhou J, Mao Y, et al. Fabrication dental prosthesis with laser engineered net shaping method. Part 1: measurement of dentognathic gypsum models with a 3D digitizer by cutting and scanning layer-by-layer[J]. Journal of Practical Stomatology, 2000,16(1):31-33. (in Chinese)
高勃,周剑,毛勇,等. 应用激光近形制造方法制作口腔修复体的基础研究——牙颌石膏模型的层析三维测量[J]. 实用口腔医学杂志,2000,16(1):31-33.
[12]Wang JX, Zeng J, Liao ShH, et al. 3D digital atlas of craniofacial bone anatomy system[J]. Chinese Journal of Anatomy, 2010, 33(5):671-673. (in Chinese)
王靖虓,曾健,廖胜辉,等.数字化颅颌面骨三维解剖图谱的建立[J].解剖学杂志 2010, 33(5):671-673.
[13]Hartkens T, Rohr K, Stiehl HS. Evaluation of 3D Operators for the Detection of Anatomical Point Landmarks in MR and CT Images[J]. Computer Vision and Image Understanding, 2002, 86(2):118-136.

Accesses

Citation

Detail

Sections
Recommended

/