两种穿支血管的定位方法
Two techniques to locate the dominant perforator vessels
目的 为常见穿支的定位与皮瓣设计提供形态学依据。方法 选用新鲜成人整尸标本2具,采用氧化铋-聚乙烯醇填充剂灌注技术,行一次
性全身动脉造影,螺旋CT扫描。将数据导入Mimics图像工作站,以常见穿支皮瓣为例,分别应用快速直接体绘制(VR)和动态重建方法(DR),
对穿支血管定位并模拟皮瓣设计。结果 两种方法均能够对常见穿支皮瓣的穿支血管定位。快速体绘制对穿支血管定位较快,但显示层次毗邻效果
不好;调节阈值动态重建方法不仅可对穿支进行定位与皮瓣设计,而且显示层次清楚。结论 应用快速直接体绘制方法可快速、粗略地显示出各
部位主要穿支的位置与源动脉;采用改变CT值的动态重建方法可以多彩色形式显示多种结构的层次与毗邻关系;两种方法结合可对穿支进行精
确定位,模拟皮瓣设计,为皮瓣的安全切取提供形态学依据。
Objective To provide morphology data that enable to locate perforator vessels and flap design. Methods Two fresh
unfixed corpses underwent whole body bismuth oxide and polyvinyl alcohol injection, and then scanned by spiral CT. The CT data
was imported into the Mimics imagine workstation to locate the dominant perforator and flap design by volume rendering and
dynamic reconstruction. Results Two methods were able to locate the perforator. Rapid direct volume rendering on perforator
vessel locating was rapider, but it was not good to show adjacent structures. The dynamic reconstruction method was used for
perforator locating and flap design, and also showed adjacent layers clearly with threshold adjustments. Conclusion Rapid direct
volume rendering is a quick and simple way to show the locating of the perforating branches of the source artery in various
parts. Dynamic reconstruction method is able to display the adjacent structures with multi colored forms.The best way to locating
perforators is combining these two methods. The results provide the morphological basis for designing and simulating the flap.
穿支皮瓣 / 血管造影 / 交互式医学影像控制系统 / 数字解剖学 / 显微外科 / 人
Perforator flap / Angiography / Mimics / Digital anatomy / Microsurgery / Human
[1]Gao J, Wen Q. Automatic 3D vascular tree construction of perforator flaps for plastic surgery planning[J]. Conf Proc IEEE Eng Med Biol Soc, 2004,5:3424-3427.
[2]Zhang ZhH, Li YB, Mei Jin, et al. A pilot study on 3D visualization of vessels using lead oxide and angiography [J]. Chinese Journal of Clinical Anatomy, 2006, 24(3): 255-258.(in Chinese)
张志浩, 李严斌, 梅劲,等. 应用放射造影术进行血管3D 可视化研究初探[J]. 中国临床解剖学杂志, 2006, 24(3): 255-258.
[3]Alonso-Burgos A, GarciaTutor E, Bastarrika G, et al. Preoperative planning of deep inferior epigastric artery perforator flap reconstruction with multislice-CT angiography: imaging findings and initial experience[J]. J Plast Reconstr Aesthet Surg, 2006, 59(6): 585-593.
[4]Chen ShX,Wu DF, Ding MCh, et al. Three dimensional visualisation of perforasome and its choke vessels [J]. Chinese Journal of Clinical Anatomy, 2011, 29(3): 237-242. (in Chinese)
陈世新, 吴东方, 丁茂超, 等. 穿支体区血管及其相互间吻合的3D可视化研究[J]. 中国临床解剖学杂志, 2011, 29(3): 237-242.
[5]Zhang HA, Jiang XY, Shi XT. Angiography with polyvinyl alcohol and bismuth oxide [J]. Chinese Journal of Clinical Anatomy, 2010, 28(5): 589-590. (in Chinese)
张惠爱, 姜秀艳, 石小田. 聚乙烯醇氧化铋人体血管3D可视化[J]. 中国临床解剖学杂志, 2010, 28(5): 589-590.
[6]Mei J, Song TSh, Dai KY, et al. Anatomic location and quantitative analyze of human cutaneous artery[J]. Chinese Journal of Clinical Anatomy, 2006, 24(3): 236-239. (in Chinese)
梅劲, 宋铁山, 戴开宇, 等. 人体皮动脉的解剖学定位定量研究[J]. 中国临床解剖学杂志, 2006, 24(3): 236-239.
[7]Masia J, Clavero JA, Larranaga JR, et al. Multidetector-row computed tomography in the planning of abdominal perforator flaps[J]. J Plast Reconstr Aesthet Surg, 2006, 59(6): 594-599.
省自然科学基金资助项目;自然科学基金资助项目
/
〈 |
|
〉 |