基于3ds Max 技术内耳模型的3D打印

石冰涛* 刘锦

doi:10.16098/j.issn.0529-1356.2016.04.023

PDF(335 KB)

解剖学报 ›› 2016, Vol. 47 ›› Issue (4) : 572-574. DOI: 10.16098/j.issn.0529-1356.2016.04.023

技术方法

基于3ds Max 技术内耳模型的3D打印

石冰涛^1*刘锦²

作者信息 +

3D printing of inner ear model based on 3ds Max technology

SHI Bing-tao ^1* LIU Jin²

Author information +

文章历史 +

摘要

目的利用3ds Max软件制作内耳模型,然后用熔融沉积型3D打印机进行内耳模型打印。方法首先用3ds Max软件以网格化修饰构建内耳模型，经Repetier-Host软件处理后利用熔融沉积型3D打印机进行打印。结果利用3ds Max软件制作的内耳模型可以通过熔融沉积型3D打印机打印内耳解剖模型，并能清晰显示内耳的解剖结构。结论将3ds Max技术与熔融沉积型3D打印机相结合进行人体解剖模型打印可以成功打印出人体解剖模型。

Abstract

Objective To use 3ds Max software to produce inner ear model, and then using the fused deposition model 3D printer to print the inner ear model. Methods In the first, the inner ear model was constructed by using 3ds Max software to build the inner ear model by Repetier-Host software, and then the 3D software was used to print the model. Results Using 3ds Max software to produce the inner ear model can be used to print the inner ear anatomy model by fusing the 3D printer. Conclusion The human anatomy model can be successfully printed out by combining the 3dsMax technology with the fused deposition type 3D printer for human anatomy model.

导出引用

石冰涛刘锦. 基于3ds Max 技术内耳模型的3D打印[J]. 解剖学报. 2016, 47(4): 572-574 https://doi.org/10.16098/j.issn.0529-1356.2016.04.023

SHI Bing-tao LIU Jin. 3D printing of inner ear model based on 3ds Max technology[J]. Acta Anatomica Sinica. 2016, 47(4): 572-574 https://doi.org/10.16098/j.issn.0529-1356.2016.04.023

参考文献

［1］Dai KR, Zhu ZhA, Sun YH, et al. Design and application of computer aided individualized artificial semi pelvis ［J］. Chinese Journal of Orthopaedics, 2005, 25 (5): 258-262. (in Chinese)

戴尅戎，朱振安，孙月华，等.计算机辅助个体化人工半骨盆的设计与应用［J］.中华骨科杂志，2005，25（5）：258-262.

［2］Chen ZhH, Wu LQ, Zhu ZhH, et al. Application of 3D printing technology in human body organ printing ［J］. Guangdong Medicine, 2014,35 (23): 3754-3756. (in Chinese)

陈志浩，伍丽青，朱振洁,等.三维打印技术在人体器官打印中的应用［J］.广东医学,2014,35(23): 3754-3756.

［3］“3D printing” reengineering the human organ ［J］. Computer and Telecommunications, 2013, (1):17-18. (in Chinese)

“3D打印”再造人体器官［J］.电脑与电信，2013, (1)：17-18.

［4］Sun Ch, Yu JH.3D printing technology in the oral clinical application ［J］. Oral Biomedical, 2014, (1):49-52. (in Chinese)

孙成，于金华.3D打印技术在口腔临床的应用［J］.口腔生物医学，2014, (1)：49-52.

［5］Zhu FD, Shi Y, Song E.Digital 3D anatomical modeling of the mandible with full teeth［J］. Acta Anatomica Sinica, 2014, 45(4): 536-539. (in Chinese)

朱赴东，石珏，宋恩. 数字化全牙列下颌骨三维解剖建模［J］. 解剖学报, 2014, 45(4): 536-539.

［6］Wu HQ, Jiang K, Hu YCh, et al. Three dimensional reconstruction of hippocampal formation in adult mouse ［J］. Acta Anatomica Sinica, 2010, 41 (3): 458-461. (in Chinese)

吴辉群, 蒋葵, 胡钰琛,等. 成年小鼠海马结构的三维重建［J］. 解剖学报, 2010, 41(3):458-461.